Hamskea Everest Rest w/Universal Bracket Mount

Everest Arrow Rest (6000 Series)

All metal construction

• Billet machined components for strength.
   

C.O.R. Mount Technology places the majority of the rest behind the bow riser allowing the shooter to bring the quiver closer to the riser for better balance. 

• Compatible with LoPro quivers from Hoyt and Mathews. 
• 3 different mounting options

C.O.R. Riser Mount Interface

• Attaches to the two holes drilled into the back of the riser eliminating the need to attach to the berger hole. 
• Puts rest at 13/16” center-shot out of the box.

C.O.R. Universal Adaptor Bracket

• Attaches the rest via the berger button. 
• Allows for torque tuning of the rest. 
• Fits majority of bows.

C.O.R. Mathews Bracket

• Compatible with Mathews bows with 0.900” thick riser. 
• Puts rest at 13/16” center-shot out of the box.

Limb Actuated multi-configurable rest

• Can be attached to the bottom or top limb without needing additional parts. 
• Can be set up as Cable Fall-Away if needed/desired.

Two stainless-steel ball bearings

• Sealed bearings that will not require maintenance. 
• Smooth consistent actuation in any weather conditions. 
• Tight tolerances that don’t change over time. 
• Rests that use bushings will have slop from the factory, and it gets worse over time.

Over molded launcher and 2-piece containment bracket

• Launcher doesn’t require felt for a quiet draw cycle. 
• 2-piece containment bracket. 
• Nylon core with a softer overmold.  
• Overmold containment bracket contains your arrow before the shot without any noise.  
• Can remove the top containment bracket if desired while still having the bottom containment bracket.

Rebound Dampener

• Durable design eliminating the need for the Dampening Coil Spring
• Manages launcher flutter, minimizes shock transferred from the limb to the rest, and is quiet during the shot.

Zero Tolerance Technology

• No slop in the carrier rod ensuring accuracy and repeatability.  

Adjustable Launcher Spring Tension

• Fine tune your rest to better fit the weight of your specific arrow. 
• Allows the launcher to flex with the arrow as it paradoxes during the shot instead of the arrow pushing off of the launcher.

Micro-Launcher Angle Adjustment “MLA” Technology

• New technology that allows continuous adjustment to the launcher angle allowing customers to micro-tune the launcher stopping points. 
• Up-stop and down-stop are independent of each other.  
• Nylon Ball prevents the screw from moving during tuning or test. 
• Separate locking set screws will lock the adjustment screws after adjustment is complete.